Payment & Shipping Terms:
|Materials:||304 Stainless||Working Environment:||Indoor|
|Anti-reverse:||Anti-reverse Function In Order To Ensure One Card For One Person||Lane Frame:||National Standard 1.5mm Thickness Brushed Satin 304 Stainless Steel|
|Application:||Goverment Office||Housing Size:||1400*280*980|
Fingerprinted security automatic slding open style flap gate turnstile for school access control
1. Main function and characteristcs
|Pass Speed||25-30 persons/min|
|Drive Mode||Motor drive|
|Max Power Consumption||200W|
|Humidity||≤90% coagulation free|
|Service Life||3,000,000 cycles|
|Outside packing||145x110x24 cm|
Testing before installation
1. Power on the device with AC110V/220V(Notice:the earth must be connected).
2. Wait 30 seconds until the device dinishes self-detection.
3. Check the wing opening in both directions,and check the LED.If it works fine,start installation
Drive board description
Flap barrier drive board,air switch,power supply were included in a stainless box,fixed inside of the housing,box size is:350mm(L)*220(W)*65(H)mm,there are wiring posts on the box for drive board.
1-5 wiring posts for user input(for access control system etc);down end wiring posts for speed gate wing position detection inputs(connected),1-9 wiring posts for IR sensors dection inputs(connected).
Note:10 core cable wiring the master device and slave device synchronization inputs keep them works fine.